Single Row Bearings
Single row deep groove ball bearings are the most widely used bearing type . They are available capped (with seals or shields) or open. They are available capped (with seals or shields) or open. Open bearings that are also available capped may have recesses in the ring side faces.Single Row Cylindrical Roller Bearings are designed to support heavy radial loads and are some of the most common bearings used around the world. These roller bearings consist of an Outer Race, Bronze or Steel Cage, a complement of rollers, and usually an Inner Race. Our single row cylindrical roller bearings are available in ISO and ABMA series.
Single row tapered roller bearings SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation.
- 228,46 mm x 431,8 mm x 85,725 mm NTN EE113091/113170 Single Row Bearings
- 17620 lbs
- Crowned
- 571,5 mm x 812,8 mm x 155,575 mm NTN M278749/M278710AG2 Single Row Bearings
- Non Contact Seal
- 8482.10.50.28
- 381 mm x 523,875 mm x 84,138 mm NTN LM565949/LM565912 Single Row Bearings
- 0644075182904
- Not Applicable
- 558,8 mm x 736,6 mm x 76,2 mm NTN EE542220/542290 Single Row Bearings
- Tapered Roller Beari
- Single Row
- 711,2 mm x 914,4 mm x 82,55 mm NTN EE755280/755360G2 Single Row Bearings
- 4547359475081
- 1.5625 in